Skip to main content

Plant Bio Reactors (PBR)

You might be aware of using E.coli for producing human proteins. E.coli is a well established expression system and easy to handle. And many people are working on this E.coli (even I'm handling only E.coli in my laboratory most times)

Okay, we are fine with E.coli, and we are producing our protein of interest in that. And what is the need for an eukaryotic expression system? That thing, I explained in one of my previous posts (Clone human genes into plants!)

I explained in that post like we are expressing our human proteins and we are growing the entire plant for obtaining our protein of interest. And we need not do that all time and there is a choice of growing plant cells in bio reactors!

Yes, we do grow E.coli in bio reactors and why not the plant cells? You might be aware of this plant bio reactors and here I'm going to share something that I know about them. 


Plant bio reactors

I attended a seminar on "Advances in plant biotechnology" and as you guessed, this post is the result of that.
Okay, let me jump into the topic.

Important factors to be considered while designing a PBR are:
  • Plant cells (as well as animal cells) are shear sensitive
  • Plant cells form aggregates - and this aggregate formation sometimes helps you with your production
  • Risk of contamination

 I consider that these three things are very important in growing your plant cells in a PBR.

Shear sensitivity:
As, the plant cells are shear sensitive, we can't use the same reactor which we use for growing our microbes for growing plant cells. If you use a super fast impeller for effective mixing to eliminate the mass transfer limitations, then I'm sure your plant cells are gonna die. So, special design is needed for growing the plant cells.

So, there must be a balanced mixing such that the mass transfer is good and also the cells should
not lyse!

Aggregate formation:
Plant cells also form aggregates like bacterial cells. We don't prefer aggregate formation in case of bacterial cells. But, in plant cells, depending on the species, this aggregate formation could improve our productivity.
On the other hand, this aggregate formation causes mass transfer limitations thus affecting your productivity.

"???" You feel like "oh God"? And your question is "whether to have aggregates in plant cell reactors or not?"

Let me answer you. You need to have aggregates if it benefits you with your productivity but the same time, the mass transfer must also be good. For having the two things in balance, we have to maintain a "particular aggregate size", so that, our productivity will be fine in both the aspects like mass transfer is good and aggregate formation improving the productivity.

Then, the next question may be "how to maintain the optimum aggregate size?"

The optimum aggregate size could be maintained by using immobilization technique. You could immobilize your cells i.e. the optimum aggregate size would be maintained using immobilized plant cells.

Risk of contamination:
Comparing the bacterial cells, plant cells have a very high risk of contamination. Even when we grow them for producing callus, there is a lot of contamination risk especially fungal infection.

So, growing them in a reactor, that will be difficult job especially in case of maintaining the sterile environment. Most times, continuous reactors are not used for bacterial cultures as it has high risk of contamination comparing the batch and fed batch. I had never seen or done continuous culture of bacteria in our lab, normally we don't do continuous culture as it goes for more than a day and also it is difficult to maintain sterility. And, even when on of my seniors wanted to try continuous culturing, we were all saying "no you better try batch instead" fearing that everything may get spoiled due to contamination.

But, if high sterility is maintained, you can do continuous culturing of plant cells also.

Hope you understood what i explained, got doubts? Comment or e-mail, will answer you as soon as possible.


Comments

  1. Very nice and informative article. Well done.

    ReplyDelete

Post a Comment

Popular posts from this blog

Lowry Assay Principle and procedure

Though there are several protein assays available, the most preferred one in many laboratories is "Lowry assay". It is effective in the concentration range of 0.01 mg/ml to 1 mg/ml. And, as an additional info, the paper published describing the procedure and principle of Lowry Assay is the most cited paper in the scientific history. (Feeling like, "Wow! I want to publish one to compete with Oliver.H. Lowry"???  :P) Why Lowry?   Though there are several other protein assays, mostly Lowry assay is used in many laboratories. The reasons for preferring Lowry are: sensitivity of the assay, highly reproducible, cost effective, easy to perform. Biuret assay is generally used for higher protein concentrations like tissue samples but, Lowry for less concentrated samples and hence used in most of the molecular biology laboratories where there will be need for assaying comparatively less concentrated protein samples (in most cases where we attempt to produce enzymes). Oth

Sea Butterfly!

Neih hou!  Don't roll you eyes wondering what it is! "Neih hou" is how you say "hello" in Cantonese. Guess what, I am in Hong Kong and therefore the language Cantonese. I came to Hong Kong this summer as an intern before officially joining as a PhD Student. This is my second experience abroad, far away from home, new language, new culture, I expected me to have a "really" bad cultural shock, but, actually I experienced only 50% of what I expected. For a girl who have used the marina beach only for eating "sundal", bikini in beach was a shock (FEEL FREE TO JUDGE ME!). The first time, I went to the big wave beach here, I was the only one who was totally covered, when everyone was enjoying their Beer, I was slowly sipping my lemon juice (THE ODD ONE OUT!). I realized how beautifully different the world outside is! There is no single standard for right or wrong, it varies in different countries, in different regions around the world. And it

The Butterfly flew for the first time!

Hi dear sweet lovely reader, Didn't meet you for a long time... Just after complaining about the stipend problem in the last post, I actually wanted to write a lot here, but, couldn't find time (Such a lazy girl, I am!). As you might be knowing, the author (me) is the butterfly here :P And, I flew for the first time!! YEAH! I FLEW! I flew like a butterfly! It was an awesome experience flying for the very first time! (ow, no! I dint put a trans-gene in my body and fly after getting  a pair of wings, but with a passport and VISA). I'm this girl, full of dreams wishing to do "this", "that" and "all kind of stuffs that one can do". And, one among those dreams was to fly one day! TO FLY FREE!(I mean, not free of cost :P, but liberation) I always wanted to fly in those big, big airplanes, but, I always have avoided that mode of transport. Reason? Obviously, it would burn a big hole in my dad's pocket (actually he can afford if I wan